Skip to content
Housely

Homeowners and landlords · 3 min read

A water heater maintenance schedule you can keep

Plan water-heater leak checks and annual professional care, keep service records, and adapt a starter schedule to your actual model and manual.

By Housely · Updated

Housely catalog starting schedule

Adjust defaults to your model’s manual and professional advice. Times are estimates.
TaskIntervalEstimated timeWho does it
Inspect Water Heater for LeaksEvery 1 month10 minutesOwner, when instructions and access allow
Flush Water Heater TankEvery 1 year60 minutesQualified professional
Water Heater Annual ServiceEvery 1 year60 minutesQualified professional

The quick answer

  • Use the actual model’s manual.
  • Track checks and work performed.
  • Adapt catalog defaults to professional advice.

1. Start with the actual heater and its manual

Record the model, serial number, location, installation date, and installer’s contact. Find the operating manual for that exact model before setting reminders. Tank, tankless, electric, gas, and heat-pump water heaters can have different care requirements. The schedule below is the Housely catalog’s starting point for a tank water heater, not a substitute for model-specific instructions. Water conditions, warranty requirements, and the service history can change the appropriate schedule.

2. Monthly: look for leaks and visible changes

Housely starts with a monthly visual leak check and a ten-minute estimate. From a safely accessible position, look for moisture around the heater, visible corrosion, or a change since the last check. Record what you observed and a dated photo when useful. This is an observation task; it does not mean opening panels, loosening connections, or repairing a leak. EPA recommends regular visual inspection; the monthly frequency and time estimate are Housely defaults. Contact a qualified provider when you find a problem rather than waiting for the next reminder.

3. Annually: plan flushing and professional service

The catalog includes an annual tank flush and an annual professional service, each estimated at sixty minutes and assigned to professional care. EPA describes yearly flushing to reduce sediment and recommends professional service at least annually. Ask the provider which work their service includes so you do not book duplicate visits for the same task. These are planning estimates; the model, access, and condition affect actual time and scope. Flushing involves hot water and energy isolation, so this guide does not provide a DIY procedure. Have the provider check the manufacturer’s instructions and explain the appropriate interval for your heater.

4. Keep evidence, not just a completed checkbox

After a visit, keep the date, provider, actual work performed, findings, and invoice with the heater’s record. Ask what should change in the next schedule and whether follow-up is needed. A completed reminder does not establish that the appliance is fault-free. If you notice a leak or another concerning change between scheduled visits, arrange appropriate help when it occurs instead of interpreting the annual date as permission to wait.

5. Put the next date somewhere you will review

A paper calendar or a spreadsheet can track the last check and next due date. In Housely, keep the item details and service records together and review the maintenance plans available for the item. Adjust them to the actual manufacturer or provider guidance rather than accepting a default without checking. Notification delivery depends on your plan, preferences, and device permissions. Keep the manual available so the person doing the next visit can verify the schedule again.

Related guides

Sources and schedule guidance

Choose another guide →